A-33
Cisco ONS 15530 Configuration Guide and Command Reference
78-14227-01, Cisco IOS Release 12.1(10)E2
AppendixA Command Reference
APS Commands
associate interface
To associate the wavepatch interface pairs in a slot, or in the entire shelf, for APS splitter protection
using one command, use the associate interface command. To disable APS protection for the interfaces,
use the no form of this command.
associate interface wavepatch */*/working-port wavepatch */*/protection-port [enable | disable]
associate interface wavepatch slot/*/working-port wavepatch slot/*/protection-port [enable |
disable]
no associate interface wavepatch */*/working-port wavepatch */*/protection-port
no associate interface wavepatch slot/*/working-port wavepatc h slot/*/protection-port
Syntax Description
Defaults The default working interface for each of the interface pairs is the first interface in the command.
APS activity between the interfaces is disabled when the interface pairs are first associated.
The default group name for each of the interface pairs is the lower interface number.
Command Modes Redundancy configuration
Command History
Usage Guidelines Use this command to associate the interfaces for APS protection, and then enter APS configuration
mode, or to change the configuration of associated pairs. Also use this command to change the
association of one interface to another interface.
When associating wavepatch interfaces with wildcards, the command mode does not enter APS
configuration mode as it does when associating a pair of interfaces. Changes to the default APS attribute
values must be entered for interface pairs individually. See the “Examples” section.
wavepatch */*/working-port Specifies all wavepatch interfaces on the shelf to configure as
working interfaces.
wavepatch */*/protection-port Specifies all wavepatch interfaces in the shelf to configure as
protection interfaces.
enable Enables activity on the associated interface pairs. (Optional)
disable Disables activity on the associated interface pairs. This is the
default state. (Optional)
wavepatch slot/*/working-port Specifies all wavepatch interfaces in a slot to configure as
working interfaces.
wavepatch slot/*/protection-port Specifies all wavepatch interfaces in a slot to configure as
protection interfaces.
Release Modification
12.1(10)EV2 This command was introduced.