A-49
Cisco ONS 15530 Configuration Guide and Command Reference
78-14227-01, Cisco IOS Release 12.1(10)E2
AppendixA Command Reference
Debug Commands
debug driver escon
To enable ESCON multiplexing line car d driver debugg ing, use the debug driver escon command. To
disable ESCON multiplexing line car d driver debugging operations, use the no form of this command.
debug driver nvram {errors | events | fpga}
no debug driver nvram {errors | events | fpga}
Syntax Description
Defaults Disabled
Command Modes Privileged EXEC
Command History
Usage Guidelines Use this command to enable NVRAM File system platform specific debugging.
Examples The followin g example shows h ow to activate ESCON multiplexing line card driver debug g ing.
Switch# debug driver escon errors
Related Commands
errors Enables debugging for NVRAM driver error conditions.
events Enables debugging for internal software events.
fpga Enable debugging FPGA operations.
Release Modification
12.1(10)EV2 This command was introduced.
Command Description
debug aps Enables debugging of APS and APS Channel Protocol activity.
debug cpu Enables debugging of IPC initialization and switchover events.
debug diag online Enables debugging of the online diagnostics.
debug driver voa Enables debugging of OSCP activity.
debug ports Enables debugging of optical port activity.
debug redundancy Enables debugging of redundancy software o per ation .