A-24
Cisco ONS 15530 Configuration Guide and Command Reference
78-14227-01, Cisco IOS Release 12.1(10)E2
AppendixA Command Reference
APS Commands
Examples The following example shows how to modify the minimum interval between successive signal
switchovers.
Switch(config)# redundancy
Switch(config-red)# associate group sanfrancisco
Switch(config-red-aps)# aps disable
Switch(config-red-aps)# aps timer switchover-enable min-interval 4
Switch(config-red-aps)# aps enable
Related Commands Command Description
aps disable Disables APS activity between associated interfaces.
aps enable Enables APS activity between associated interfaces.
aps timer wait-to-restore Modifies the wait-to-restore timer interval.
associate group Creates an APS group and enters APS configuration mode.
show aps Displays APS configuration and operation information.