Service Tests (Diagnostics)

Service Tests (Diagnostics)

The following is a list of all internal Service Tests available in the Printer. For instructions on entering the Service Tests menu see Entering the Service Tests Menu on page 3-6.

1Scan Axis Test. See 1. Scan Axis on page 3-6

The purpose of this test is to verify the operation of components related to the Scan Axis. The tests verify the operation of the:

„PRS

„Scan Axis

„Star Wheel Lifter

„Cutter

2Paper Drive Test. See 2. Paper Drive on page 3-18

The purpose of this test is to verify the operation of components related to the Media Axis.

3Electronics Module. See 3. Electronics Module on page 3-21 The purpose of this test is to verify the operation of the:

„Main PCA (Formatter)

„Printer Configuration

„Power Supply Unit

„PrintMech (T1100/T1100ps/T610 ONLY)

„Carriage Communication

4Carriage Assembly Test. See 4. Carriage Assembly on page 3-26

The purpose of this test is to verify the operation of the Carriage Assembly.

5Sensors Test. See 5. Sensors on page 3-31

The purpose of this test is to verify the operation of the following Sensors:

„Window Sensor.

„Media Lever Sensor.

„Media Sensor.

6Rewinder Test. See 6. Rewinder on page 3-34

The purpose of this test is to verify the operation of the Rewinder.

7Ink Delivery Test. See 7. Ink Delivery System (IDS) on page 3-36

The purpose of this test is to verify the operation of the Ink Delivery System.

8Service Station Test. See 8. Service Station on page 3-42

The purpose of this test is to verify the operation of the Service Station.

9I/O Information. See 9. I/O Information on page 3-48 The purpose of this test is to verify the TCP/IP configuration.

10Unit Information. See 10. Unit Information on page 3-49

HP Designjet T Series — Service Manual

3-3