Removal and Installation

Top Cover

Removal

Switch off the printer and remove the power cable.

1. Remove the Window on page 6-12.

2. Remove the Right Cover on page 6-27.3. Remove the Left Cover on page 6-30.4. Remove the Rear Tray on page 6-35.5. Remove the Rear Cover on page 6-36.6. Remove the Front Panel on page 6-47.

7. Remove the four T-15 top screws that secure the Top Cover to the printer.

8. Remove the front T-15 screw that secures the front left side of the Top Cover to the printer.

6-50

HP Designjet T Series — Service Manual