Removal and Installation - Encoder Strip, spring and attachment nut (T1120/T1120ps)

Encoder Strip, spring and attachment nut (T1120/T1120ps)

Removal

Switch off the printer and remove the power cable.

1. Remove the Right Cover on page 6-27.2. Remove the Left Cover on page 6-30.

3. Remove the T-15 screw that secures Encoder Strip to the printer.

4. Grip the Encoder Strip and move it towards the left to take off the tension until you have completed the next step.

5. Unclip the Encoder Strip from it’s attachment lugs.

HP Designjet T Series — Service Manual

6-99