Service Tests (Diagnostics)
5Once the test has completed, the Front Panel prompts you to confirm that the PRS moved.
6If the PRS moved, press OK to accept the results. If the PRS did not move, press Back or Cancel to reject the results and exit the test.
7The Front Panel shows the test complete display for a few seconds.
8The Front Panel prompts you to shutdown the printer to complete the test.
9Press any key to shutdown the printer.
Scan Axis Test
The Scan Axis subsystem is designed to move the carriage assembly between two predetermined horizontal positions with respect to the print platen plane. This allows media of different widths to be used without losing print quality.
Perform the Scan Axis - Scan Axis test as follows:
Perform this test with the Printheads and the Tubes System installed in order to get values that can be compared correctly.
1In the Diagnostics menu, scroll to 1. Scan Axis and press OK.
HP Designjet T Series — Service Manual |