Ink Supplies Troubleshooting
7Lift the blue handle and pull the Printhead straight up out of the Carriage.
8To insert a new printhead first remove the orange protective caps.
9The printhead is designed to prevent you from accidentally inserting it into the wrong slot. Check that the colored label on the printhead matches the colored label of the carriage slot into which the printhead is to be inserted. Insert the printhead slowly and vertically, straight down. It may be damaged if you insert it too fast, or at an angle, or if you rotate it as you insert it.
10Insert all other printheads that need to be installed, and close the carriage cover.
11Close the Window.
12When all the printheads have been inserted correctly and accepted by the printer, the printer will beep. If the printer does not beep when you insert the printhead and the Replace message appears on the front panel display, the printhead may need to be reinserted.
The front panel display confirms that all printheads are correctly inserted.
HP Designjet T Series — Service Manual |