Removal and Installation - Right Rear Tray Support

Right Rear Tray Support

Removal

Switch off the printer and remove the power cable.

1. Remove the Rear Tray on page 6-35.2. Remove the Right Cover on page 6-27.3. Remove the Left Cover on page 6-30.4. Remove the Rear Cover on page 6-36.

5. Remove two T-15 screws that secure the Right Rear Tray Support to the printer.

6. Rotate the Right Rear Tray Support counterclockwise approximately 30 degrees.

HP Designjet T Series — Service Manual

6-43