Removal and Installation - Aerosol Fan Assembly (T1100, T1100ps, T610 ONLY)

Aerosol Fan Assembly (T1100, T1100ps, T610 ONLY)

Removal

Switch off the printer and remove the power cable.

The Aerosol Fan Assembly does not exist for:

„T1120/T1120ps printers.

„T1100, T1100ps, T610 printers manufactured after mid-February, 2008

This procedure is only for T1100, T1100ps, and T610 printers that include an Aerosol Fan Assembly.

1. Remove the Right Cover on page 6-27.

2. Disconnect the Aerosol Fan Assembly inline connector.

3. Remove the four T-15 screws that secure the Aerosol Fan Assembly to the Service

Station.

The four access holes in the Aerosol Fan Assembly housing are the same size as the attachment screw diameter so you will need a normal Torx Screwdriver, not a multi-tool, to remove the screws.

HP Designjet T Series — Service Manual

6-71