Removal and Installation - Trailing Cable (T1120/T1120ps)

Trailing Cable (T1120/T1120ps)

The Trailing Cable, as a service part, is included with the Ink Supply Tubes. For information about the service part, see Scan-Axis Assemblies (T1120/T1120ps) on page 5-22.

For the disassembly procedure of the Ink Supply Tubes, see Ink Supply Tubes (T1120/T1120ps) on page 6-193.

Removal

Switch off the printer and remove the power cable.

1. Remove the Left Cover on page 6-30.2. Remove the Right Cover on page 6-27.3. Remove the Front Panel on page 6-47.4. Remove the Top Cover on page 6-50.

5. Remove the Window Position Sensor on page 6-53.

6. Loosen the T-10 uncapping screw sufficiently so you can manually move the Carriage Assembly in step 7.

7. Push the Carriage Assembly into the print path.

HP Designjet T Series — Service Manual

6-109