Removal and Installation - Service Station (T1100/T1100ps/T610)
Service Station (T1100/T1100ps/T610)
Removal
Switch off the printer and remove the power cable.
1. Remove the Right Cover on page
2. Disconnect the two lower connectors from the PrintMech PCA.
44 inch T1100 printer shown (with Rewinder)
3. Unroute the two cables disconnected in step 2 from the two cable clamps below the PrintMech PCA.
44 inch T1100 printer shown (with Rewinder)
4. Remove the grounding cable attachment screw from the PrintMech PCA.
44 inch T1100 printer shown (with Rewinder)
HP Designjet T Series — Service Manual |