Service Tests and Utilities

This option allows you to view the Firmware Version, Part Number, and

Serial Number of the Printer.

11EEROM Reset. See 11. EEROM Reset on page 3-50 The purpose of this test is to reset the EEROM values.

12Set Unit Configuration. See 12. Set Unit Configuration on page 3-51 Not implemented.

13Error 71:19 Recovery. See 13. Error 71:19 Recovery on page 3-51

The purpose of this utility is to set the Serial Number and Part Number in case both the Formatter and the PrintMech PCA are replaced at the same time or select the correct Serial Number and Part Number if only one of the components has been replaced.

14Others. See 14. Others on page 3-55 Not implemented.

3-4

HP Designjet T Series — Service Manual