Removal and Installation - Ink Supply Tubes Support Rail (T1100/T1100ps/T610)

Ink Supply Tubes Support Rail (T1100/T1100ps/T610)

Removal

Switch off the printer and remove the power cable.

1. Remove the Right Cover on page 6-27.2. Remove the Left Cover on page 6-30.3. Remove the Front Panel on page 6-47.4. Remove the Top Cover on page 6-50.

5. Remove the Window Position Sensor on page 6-53.

6. Remove the Ink Supply Tubes from the Ink Supply Tubes Support Rail.

7. Remove the T-15 screws that secure the rear attachment brackets to the Ink Supply Tubes Support Rail.

HP Designjet T Series — Service Manual

6-55