Removal and Installation - Right Starwheel Lifter (T1100/T1100ps/T610)
9. Rotate the Right Starwheel Lifter sufficiently
to disengage the right attachment lug.
10. Tilt the Right Starwheel Lifter sufficiently to disengage the left attachment lug.
11. Remove the Right Starwheel Lifter from the printer.
Do NOT remove the spring from the Right Starwheel Lifter, because it is difficult to reattach.
When you finish installing or replacing this component, you must perform the necessary Service Calibrations. To find which calibrations you must perform, see Service Calibration Guide to Removal and Installation on page
HP Designjet T Series — Service Manual |