Removal and Installation - Encoder Strip, spring and attachment nut (T1100/T1100ps/ T610)

6. Loosen the T-10 uncapping screw sufficiently so you can manually move the

Carriage Assembly in step 7.

If you are uncapping a 44 inch printer, you will need to use either a very long or very short screwdriver to loosen the uncapping screw. In this way, you can loosen the screw and pass the rewinder motor.

44 inch T1100 printer shown (with Rewinder)

7. Push the Carriage Assembly into the print path.

8. Unclip the Encoder Strip tensioner from the right hand end.

2

1

HP Designjet T Series — Service Manual

6-97