System Error Codes - Full Descriptions

4If the System Error continues, replace the Service Station. See Service Station (T1100/T1100ps/T610) on page 6-61 or Service Station (T1120/ T1120ps) on page 6-65.

5If the System Error continues, replace the PrintMech PCA. See PrintMech PCA (T1100, T1100ps, T610 ONLY) on page 6-73.

System Error:

21.1:YZ

Problem

Fail moving the Primer Motor of the Service Station.

Description:

 

Corrective Action: Try the following:

1Remove the Right Cover and make sure the cables from the Printmech PCA to the Service Station are connected and are not damaged (T1100/T1100ps/ T610 ONLY).

2Perform the Service Station diagnostic test to troubleshoot the problem further. See 8. Service Station on page 3-42.

3If the System Error continues, replace the Service Station. See Service Station (T1100/T1100ps/T610) on page 6-61 or Service Station (T1120/ T1120ps) on page 6-65.

4If the System Error continues, replace the PrintMech PCA. See PrintMech PCA (T1100, T1100ps, T610 ONLY) on page 6-73.

Warning:

2x.n:10

Problem

Ink supply error found during IDS diagnostic test. The n represents the ink

Description:

supply that is failing. The ink supply furthest to the left is always 0, and then

 

they count up from left to right.

0

1

2

3

4

5

 

 

 

 

 

 

Left Ink Supplies

Corrective Action: Try the following:

„Replace the Left Ink Supply Station. See Left Ink Supply Station on page 6- 183.

System Error:

22.0:YZ

Problem

Left Ink Supply Station error.

Description:

 

Corrective Action: Try the following:

1Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer.

HP Designjet T Series — Service Manual

2-13