Removal and Installation - Media Advance Drive

Media Advance Drive

The Media Advance Drive removal procedure for the T1100/T1100ps/T610 and T1120/ T1120ps printers is the same.

The only difference between the two sets of printers is the cable connections.

Removal

Switch off the printer and remove the power cable.

1. Remove the Left Cover on page 6-30.

2. Remove the Electronics Module Main PCA and PSU. See page 6-202or 6-205 depending on the printer model.

3. Remove the Left Spittoon on page 6-214.

4. Remove the Encoder Disk and Encoder Sensor on page 6-216.

5. Unroute the Media Advance Drive power cable.

6. Remove three T-15 screws that secure the Media Advance Drive to the printer.

HP Designjet T Series — Service Manual

6-218