Service Tests and Utilities
6The Front Panel prompts you to shutdown the printer to complete the test.
7Press any key to shutdown the printer.
Aerosol Fan
The Aerosol Fan diagnostic test is only available for printers that include an aerosol fan.
1In the Diagnostics menu, scroll to 8. Service Station and press OK.
2The Front Panel will show the 8. Service Station submenu.
3In the 8. Service Station submenu, scroll to Aerosol Fan and press OK to start the test.
4The Aerosol Fan test starts and the front Panel displays the following messages:
Starting Horsburgh and Mips.
Starting Nvm.
Starting TestsGpio.
Getting Part number.
Reading Aerosol Fan.
5The front Panel then prompts you switch on the Aerosol Fan.
HP Designjet T Series — Service Manual |