Removal and Installation - Pinchwheel Assembly

7. Remove two T-15 screws that secure the

Pinchwheel Assembly to the printer.

8. Remove the Pinchwheel Assembly from the printer.

Installation

Use the following procedure to align the Pinchwheel Assembly using the Pinchwheel Alignment Tool during reassembly

Never remove and replace all the Pinchwheel Assemblies at the same time. In order to align a Pinchwheel Assembly, you need a minimum one Pinchwheel Assembly correctly aligned by the manufacturer.

1. Insert the Pinchwheel Insertion Tool through the appropriate access hole for the

Pinchwheel Assembly you are installing.

Be very careful not to damage the Encoder Strip or the Belt Assembly with the Pinchwheel Insertion Tool.

HP Designjet T Series — Service Manual

6-230