Removal and Installation - Trailing Cable (T1100/T1100ps/T610)
21. Unroute the Trailing Cables.
22.Remove the Trailing Cables from the printer.
Installation
When you finish installing or replacing this component, you must perform the necessary Service Calibrations. To find which calibrations you must perform, see Service Calibration Guide to Removal and Installation on page
Make sure you carry out the following actions during the installation of the Trailing Cable
1. Use an alcohol (from the Lubrification Kit or Tool Kit) dampened cloth to remove all traces of residual adhesive from the double sided pads removed earlier before applying new pads in the same positions as the original pads.
HP Designjet T Series — Service Manual |