System Error Codes - Full Descriptions
The display list is not visible to the user.
There has been a few cases where a print job that had a relatively small file size has triggered an out of memory message to be displayed. Print jobs like this typically have a large number of objects in them or have complex objects such as raster images with gradients or objects with multiple layers. Any print job that contains these type of images can result in a display list memory greater than 128MB.
Corrective Action: Try the following:
1It is recommended that you remove any unnecessary files from the Hard Disk Drive of the Formatter using the Web Server.
2It is also recommended that you upgrade the firmware to the latest version available at www.hp.com.
3Decrease the print resolution to 300 dpi
If the customer does not accept the print quality after reducing the resolution or using Econofast printmode, proceed to the workaround in step 4.
The resolution required by the printer to process the file is set by printmode selected (Best, Normal, Fast). There is a setting available that enables you to decrease the resolution for each printmode to 300 dpi. If this setting is used, the rendering resolution will be reduced, but the output (printing) resolution will remain the default of the selected printmode There could be an impact on Image Quality because of the reduction in the rendering resolution, this will be especially noticeable in circles and lines with very low inclination.
4Use ‘Econofast’ printmode. The rendering resolution will be selected by default to 300 dpi. From the Printint Preferences pane, select custom
HP Designjet T Series — Service Manual |