Removal and Installation - Media Advance Roller (T1100/T1100ps/T610 ONLY)

Media Advance Roller (T1100/T1100ps/T610 ONLY)

Removal

Switch off the printer and remove the power cable.

1. Remove the Left Cover on page 6-30.

2. Remove the Clean Out Assembly on page

6-90.

3. Remove the Electronics Module Main PCA and PSU. See page 6-202or 6-205 depending on the printer model.

4. Remove the Left Spittoon on page 6-214.

5. Remove the Media Advance Drive on page

6-218.

6. Remove the Media Advance Roller drive gear wheel to gain access the locking

plate attachment screw.

The Media Advance Roller drive gear is is delicate, and should be removed straight off the spindle.

7. Remove two T-15 screws that secure the Media Advance Roller locking plate to the printer.

HP Designjet T Series — Service Manual

6-223