Service Tests (Diagnostics)
6Press OK to switch on the Aerosol Fan. If you do not wish to switch on the Aerosol Fan use the Arrow keys to select NO and press OK.
7The test continues and the Front Panel displays the following message:
Turning on Aerosol Fan.
8The Front Panel then displays the results.
9Press any key to continue.
10The front panel prompts you to check if the Aerosol Fan is operating.
11Listen carefully to check if the Aerosol Fan is operating.
12If it is operating, use the Arrow keys to select YES and press OK. If it is NOT operating, select NO and press OK.
13The Front Panel then displays the following message:
Checking Fault condition
14The Front Panel shows the test result.
15Press any key to finish.
16The Front Panel shows the test complete display for a few seconds.
HP Designjet T Series — Service Manual |