Removal and Installation

Carriage Rail Oiler

Removal

Switch off the printer and remove the power cable.

1. Remove the Right Cover on page 6-27.

2. Remove the T-15 Carriage Rail Oiler attachment screw.

3. Remove the Carriage Rail Oiler from the printer.

When you reinstall the Carriage Rail Oiler, use the Oil and Oil Dispenser from the Lubrification Kit to add 2-3 drops of oil to the foam of the Carriage Rail Oiler and in the small depression of the Carriage Rear Bushing.

6-150

HP Designjet T Series — Service Manual