Removal and Installation - Drop Detector

Drop Detector

Removal

Switch off the printer and remove the power cable.

1. Remove the Right Cover on page 6-27.

2. Remove the Service station. See Service Station (T1100/T1100ps/T610) on page 6-61 or Service Station (T1120/T1120ps) on page 6-65 depending on the model.

3. Unroute the Drop Detector ribbon cable from the Service Station cable clamps.

4. Remove the T-15 screw that secures the Drop Detector to the Service Station.

HP Designjet T Series — Service Manual

6-69