Removal and Installation - Media Advance Drive
Installation
When you finish installing or replacing this component, you must perform the necessary Service Calibrations. To find which calibrations you must perform, see Service Calibration Guide to Removal and Installation on page
Use the following procedure to install and correctly adjust a new Media Advance Drive. You will need Media Advance Drive Adjustment Tool from the Tool KIt
If you are installing the Encoder Sensor after replacing the Media Advance Drive with a new unit, you will need to adjust the Encoder Sensor position on the Media Advance Drive.
1. Carefully position the Media Advance Drive in the printer.
2. These parts should be loose during disassembly. They will be tightened in the
following steps.
Follow these instructions exactly. If you do not follow these instructions, the printer may not function properly.
HP Designjet T Series — Service Manual |