Removal and Installation - Carriage Rear Bushing

Carriage Rear Bushing

Removal

Switch off the printer and remove the power cable.

1. Remove the Front Cover on page 6-16.

2. Remove the Right Cover on page 6-27.

3. Remove the Left Cover on page 6-30.

4. Remove the Cutter Assembly on page 6-

42.

5. Remove the Front Panel on page 6-47.

6. Remove the Top Cover on page 6-50.

7. Remove the Window Position Sensor on page 6-53.

8. If the printer is a T1100/T1100ps/T610, remove the Ink Supply Tubes Support Rail (T1100/T1100ps/T610) on page 6-55.

9. Remove the Encoder Strip, spring, and attachment nut. See page 6-96 or 6-99 depending on the printer model.

10. Remove the Carriage Assembly. See page 6-116 or 6-127 depending on the printer model.

11. Squeeze the left hand clip of the Carriage Rear Bushing sufficiently to be able to release it from the Carriage Assembly.

HP Designjet T Series — Service Manual

6-137