Removal and Installation - Left Starwheel Lifter

Left Starwheel Lifter

Removal

Switch off the printer and remove the power cable.

1. Remove the Front Cover on page 6-16.2. Remove the Left Cover on page 6-30.

3. Remove the Electronics Module Main PCA and PSU. See page 6-202or 6-205 depending on the printer model.

4. Remove the Left Spittoon on page 6-214.

5. Remove the Starwheel Assembly on page

6-208.

6. Remove two T-8 screws that secure the Left Starwheel Lifter to the printer.

7. Rotate the Left Starwheel Lifter sufficiently to disengage the right attachment lug.

HP Designjet T Series — Service Manual

6-237