Service Tests and Utilities
1In the Diagnostics menu, scroll to 2. Electronics Module and press OK.
2The printer starts the Electronics Module test and displays the following messages:
Starting Horsburgh and Mips.
Starting Nvm.
Accessing Nvm.
3The printer starts the Electronics Module test to verify the subsystem and prompts you to test the Power Supply:
4Press OK to the test the Power Supply. If you do not wish to test the power supply use the Arrow keys to select NO and press OK.
5The Power supply test starts and the Front Panel displays the following messages:
Starting DelSol7.
Starting Carriage.
Getting PSU voltages.
6The Front Panel then displays the Power Supply test results.
7Press any key to continue.
8The Fan Speed test starts and the Front Panel displays:
Getting PSU Fan Rotation
HP Designjet T Series — Service Manual |