Removal and Installation - Right Spindle Holder and Rewinder (T1120/T1120ps)
Right Spindle Holder and Rewinder (T1120/T1120ps)
The Rewinder is only applicable to the 44 inch printers.
For 24 inch models, see Right Spindle Holder (24” ONLY) on page
Removal
Switch off the printer and remove the power cable.
1. Remove the Spindle on page
2. Remove the Right Cover on page
3. Remove the grounding cable attachment screw from the metal sideplate.
4. Disconnect the Rewinder and encoder cables from the L1 Harness.
HP Designjet T Series — Service Manual |