Removal and Installation - Left Spittoon

Left Spittoon

Removal

This procedure describes how to remove the complete Left Spittoon which is necessary to gain access to other components.

Switch off the printer and remove the power cable.

1. Remove the Left Cover on page 6-30.

2. Remove the Electronics Module Main PCA and PSU. See page 6-202or 6-205 depending on the printer model.

3. Remove two T-8 screws that secure the Left Spittoon to the printer.

4. Remove one T-10 screw that secures the Left Spittoon to the printer.

HP Designjet T Series — Service Manual

6-214