Service Tests and Utilities

14The Front Panel prompts you to shutdown the printer to complete the test.

15Press any key to shutdown the printer.

8.Service Station

The complete Service Station test consists of individual tests for the different components related to this subsystem.

These tests are:

„Service Station

„Primer Motor

„Aerosol Fan

Diagnostic tests also need to be performed after removing or replacing certain printer components. If you have removed or replaced printer components, check the Service Calibration Guide to Removal and Installation on page 6-5 to see which tests and calibrations you need to perform.

Service Station

1In the Diagnostics menu, scroll to 8. Service Station and press OK.

2The Front Panel will show the 8. Service Station submenu.

3In the 8. Service Station submenu, scroll to Service Station and press OK to start the test.

4The Service Station test starts and the front Panel displays the following messages:

„Starting Horsburgh and Mips

„Starting Nvm

„Booting up Carriage.

3-42

HP Designjet T Series — Service Manual