Service Tests (Diagnostics)
Starting SVS Motor.
Starting Carriage Motor
Getting Part Number.
Starting Service Station.
Starting Scan Axis.
Moving SVS out of Sax.
Homing Scan Axis.
Moving Carriage out of SVS.
Homing Service Station.
Moving to Spit Rear pos.
Moving to Spit Front pos.
Moving to Wipe forward pos.
Moving to Wipe reverse pos.
Moving to Cleaner pos.
Moving to SOL pos.
Moving to PEG pos.
Homing Scan Axis.
Starting ServicingServices.
Capping Service Station.
Uncapping Service Station.
Starting Mechanical Init.
5The Front Panel then prompts you to check the status of the printer.
6Check that:
The Window is closed.
The Media Lever is lowered.
All Printheads are inserted.
Valid Cartridges are inserted.
7Press OK to continue.
8The test continues and the Front Panel displays the following messages:
Moving SVS to Wiping bider position.
Moving SVS to Scrape position.
Moving SVS to Snout Wipe position.
HP Designjet T Series — Service Manual |