Service Calibrations

position to the Black Printhead. This calibration is integrated into the Scan Axis diagnostic test. See 1. Scan Axis on page 3-6.

Perform the Scan Axis Calibration as follows:

Make sure you load one of the following media into the

Printer before performing this calibration:

„HP Bond Paper.

„HP Glossy Media.

„HP Coated Paper.

„HP Productivity Photo Gloss.

„HP Heavyweight Coated Paper.

„HP Super Heavyweight Coated Paper.

„HP Bright White Inkjet Paper.

1In the Service Calibrations submenu, scroll to Scan Axis Calibration and press Enter.

2To calibrate the Scan Axis, run the Scan Axis diagnostic test.. See 1. Scan Axis on page 3-6.

Service Station Calibration

The purpose of this Service Calibration is to calibrate the Service Station in relation to the Carriage Assembly. This calibration is integrated into the Scan Axis diagnostic test. See 8. Service Station on page 3-42.

1In the Service Calibrations submenu, scroll to Service Station and press Enter.

HP Designjet T Series — Service Manual

4-5