Removal and Installation

Scan-Axis Motor (T1120/T1120ps)

Removal

Switch off the printer and remove the power cable.

The only difference between the T1120/T1120ps and T1100, T1100ps, T610 Scan-Axis Motor is the cable harness.

1. Remove the Right Cover on page 6-27.2. Remove the Left Cover on page 6-30.

3. Loosen the T-10 uncapping screw sufficiently so you can manually move the Carriage Assembly in step 4.

4. Push the Carriage Assembly into the print path.

6-146

HP Designjet T Series — Service Manual