Removal and Installation - Carriage Assembly (T1120/T1120ps)

Carriage Assembly (T1120/T1120ps)

Removal

Switch off the printer and remove the power cable.

1. Remove the Front Cover on page 6-16.

2. Remove the Right Cover on page 6-27.

3. Remove the Left Cover on page 6-30.

4. Remove the Cutter Assembly on page 6-

42.

5. Remove the Front Panel on page 6-47.

6. Remove the Top Cover on page 6-50.

7. Remove the Window Position Sensor on page 6-53.

8. Remove the Encoder Strip, spring and attachment nut (T1120/T1120ps) on page 6-99.

9. If necessary manually move the Carriage Assembly fully right into the docking station.

10. Disconnect the ribbon cable of the Trailing Cables from the Electronics Module.

11. Unroute the Trailing Cables.

HP Designjet T Series — Service Manual

6-127