Removal and Installation - Pen to Paper Space (PPS) Solenoid (T1100/T1100ps/T610)

Pen to Paper Space (PPS) Solenoid (T1100/T1100ps/T610)

Removal

Switch off the printer and remove the power cable.

1. Remove the Right Cover on page 6-27.

2. Unroute the Pen to Paper Space (PPS) Solenoid cable from the cable clamp.

3. Disconnect the Pen to Paper Space (PPS) Solenoid connector from the PrintMech PCA.

4. Remove two T-15 screws that secure the Pen to Paper Space (PPS) Solenoid to the printer.

HP Designjet T Series — Service Manual

6-75