Removal and Installation - Carriage Assembly (T1100/T1100ps/T610)

25.Loosen the T-10 uncapping screw sufficiently so you can manually move the

Carriage Assembly in step 26.

If you are uncapping a 44 inch printer, you will need to use either a very long or very short screwdriver to loosen the uncapping screw. In this way, you can loosen the screw and pass the rewinder motor.

44 inch T1100 printer shown (with Rewinder)

26.Push the Carriage Assembly into the print path.

27. Unclip the small cover of the Carriage PCA.

HP Designjet T Series — Service Manual

6-121