Ink Supplies Troubleshooting
approximately 8% of ink available for the user.
Empty | The printer will stop and will not be able to continue printing until a new Ink | |||||||
| Cartridge has been installed. If this occurs halfway through printing an | |||||||
| image, you should check the quality of this image, as stopping | |||||||
| affect the print. It would be recommended to reprint the image once a new | |||||||
| Ink Cartridge has been installed. |
|
| |||||
Reseat | You are recommended to remove the Ink Cartridge and then reinsert it. | |||||||
Replace | You are recommended to replace the Ink Cartridge with a new Ink | |||||||
| Cartridge. |
|
|
|
|
| ||
Altered | There is something unexpected about the Ink Cartridge's status. | |||||||
Expired | The Ink Cartridge has passed the expiration date. |
| ||||||
| Printhead status messages |
|
| |||||
OK | The Printhead is operating correctly and no action is required. | |||||||
Missing | There is no Printhead present, or it is not properly connected to the printer. | |||||||
Test printhead | You are recommended to test the printheads individually to find the failing | |||||||
separately | printhead. Remove all the printheads and insert them alone one by one, | |||||||
| Closing the latch and the carriage cover after every insertion. The front | |||||||
| panel display will indicate the failing one showing the reseat or replace | |||||||
| message. |
|
|
|
|
| ||
Reseat | You are recommended to start the printhead removal process from the front | |||||||
| panel, but instead of removing the printhead, simply press the OK key on the | |||||||
| front panel. |
|
|
|
|
| ||
Replace | You are recommended to remove the printhead and then reinsert it; if that | |||||||
| fails, clean the electrical connections; if that fails, replace the printhead with | |||||||
| a new printhead. |
|
|
| ||||
Replacement | A printhead replacement process has not completed successfully, relaunch | |||||||
incomplete | the replacement process and let it finish completely (it is not needed to | |||||||
| change the printheads). |
|
|
| ||||
Remove | The printhead is not a suitable type for use in printing (for instance, a setup | |||||||
| printhead). |
|
|
|
|
| ||
| Printhead Error Codes |
|
| |||||
| The following table describes the Printhead Error Codes. Refer to the above | |||||||
| descriptions of the status messages for the appropriate action. | |||||||
|
|
|
|
|
|
|
|
|
|
| Error |
| Status |
| Status | Description | Comments |
|
| Code |
| Name |
| Message |
|
|
|
|
|
|
|
|
|
|
|
|
| 0 |
| Working |
| OK | The printhead is |
|
|
|
|
|
|
|
| working properly |
|
|
|
|
|
|
|
|
|
|
HP Designjet T Series — Service Manual |