Removal and Installation - Right Spindle Holder and Rewinder (T1100/T1100ps/T610)

Right Spindle Holder and Rewinder (T1100/T1100ps/T610)

The Rewinder is only applicable to the 44 inch printers.

For the 24 inch models, see Right Spindle Holder (24” ONLY) on page 6-81.

Removal

Switch off the printer and remove the power cable.

1. Remove the Spindle on page 6-79.

2. Remove the Right Cover on page 6-27

3. Remove the grounding cable attachment screw from the PrintMech PCA.

44 inch T1100 printer shown (with Rewinder)

4. Disconnect the Rewinder and encoder cables from the PrintMech PCA.

44 inch T1100 printer shown (with Rewinder)

HP Designjet T Series — Service Manual

6-83