Service Tests and Utilities

Select Reset usage counters to reset the Life Counter of a single part.

aIf you select Reset Maintenance usage, which will reset the Life Counter for ALL parts included in a Preventive Maintenance Kit (PMK), you can choose from the following Preventive Maintenance Kits:

„Preventive Maintenance Kit 1 (PMK1). See Preventive Maintenance Kit #1 on page 7-5.

„Preventive Maintenance Kit 2 (PMK2). See Preventive Maintenance Kit #2 on page 7-6.

„Preventive Maintenance Kit 3 (PMK3). See Preventive Maintenance Kit #3 on page 7-6.

For more information about the counters that are reset, See Chapter 7 Preventive Maintenance on page 7-1.

It is also advisable to check the status of the Life Counters related to the other Preventive Maintenance Kits to avoid multiple trips to the customer.

bIf you select to Reset usage counters, which will reset the Life Counter of a single part, you can choose from the following parts:

„Tubes and Trailing Cable

„Scan-Axis Belt

„Scan Motor

„Left Spittoon

„Right Spittoon

„Full Bleed Foams

„Aerosol Fans

„Carriage

„Service Station

3Once you have selected a Life Counter to reset, the following message will be displayed on the Front Panel. Press the OK key to reset the selected Life Counter or press Back/Cancel to exit without resetting the Life Counter.

3-64

HP Designjet T Series — Service Manual