Service Tests (Diagnostics)
Starting Nvm
Starting Tests PWM.
Starting Tests GPIO.
Booting up the Carriage.
Starting DelSol1.
Starting Carriage.
Getting Part Number.
Part Number
Checking PCA Rev
3The Front Panel then displays the Main PCA Revision and prompts you to press any key to continue. The Main PCA Revision should be greater than
.15.
4Press any key to continue.
5The Front Panel displays the following messages: Prog slow PWM paper.
6The Front Panel then prompts you to remove the media.
7Remove the media.
8Press any key to continue.
9The Front Panel then displays the Open Loop ROLL test result.
10Press any key to continue.
HP Designjet T Series — Service Manual |