Removal and Installation - Right Starwheel Lifter (T1100/T1100ps/T610)

Right Starwheel Lifter (T1100/T1100ps/T610)

Removal

Switch off the printer and remove the power cable.

1. Remove the Front Cover on page 6-16.2. Remove the Right Cover on page 6-27.

3. Remove the Starwheel Assembly on page

6-208.

4. Loosen the T-10 uncapping screw sufficiently so you can manually move the

Carriage Assembly in step 5.

If you are uncapping a 44 inch printer, you will need to use either a very long or very short screwdriver to loosen the uncapping screw. In this way, you can loosen the screw and pass the rewinder motor.

44 inch T1100 printer shown (with Rewinder)

5. Push the Carriage Assembly into the print path.

HP Designjet T Series — Service Manual

6-239