Removal and Installation - Right Front Trim
Right Front Trim
Removal
Switch off the printer and remove the power cable.
1. Remove the Front Cover on page
2. Remove the Media Output Assembly on page
3. Remove two
4. Open the Right Ink Cartridge Door by applying sharp pressure to the right side of the door and lifting firmly where the door meets the Right Cover. Use your hands. When the door is unclipped from the pressure applied to the right side of the door, you will hear a sound that corresponds to the clip.
Do NOT use a screwdriver or other tool to open the Right Ink Cartridge Door.
5. Unclip the Right Front Trim.
HP Designjet T Series — Service Manual |