Service Utilities
2The Front Panel prompts you to confirm that the dummy printheads are correctly inserted. If the dummy printheads are correctly inserted, press OK.
If you have not inserted the dummy printheads, press BACK or CANCEL to exit the test. Insert the dummy printheads using the Change Printheads procedure. Changing a Printhead on page
3The Front Panel displays a message to say the Printer is going to reboot.
4Once the tubes system has been purged, the following message will instruct you to open the Window and the carriage to access the printheads:
5Once you have opened the carriage cover, the Front Panel prompts you to verify that the Setup Printheads contain ink. If the Ink Supply Tubes have been primed correctly, the windows will contain ink. If the windows on top of each Setup Printhead do NOT contain ink, then you may need to repeat the Prime Tubes process from the beginning.
6If all the Setup Printheads contain ink, select All with some ink. If one or more of the Setup Printheads do NOT contain ink, select Not all with ink.
HP Designjet T Series — Service Manual |