Removal and Installation - Left Rear Tray Support

Left Rear Tray Support

Removal

Switch off the printer and remove the power cable.

1. Remove the Rear Tray on page 6-35.2. Remove the Right Cover on page 6-27.3. Remove the Left Cover on page 6-30.4. Remove the Rear Cover on page 6-36.

5. Remove two T-15 screws that secure the Left Rear Tray Support to the printer.

6. Rotate the Left Rear Tray Support clockwise approximately 30 degrees.

HP Designjet T Series — Service Manual

6-45