System Error Codes

2Check that the cables between the Left Ink Supply Station and Main PCA the are not damaged and are correctly connected.

3Perform the Ink Delivery System diagnostic test to troubleshoot the problem further. See 7. Ink Delivery System (IDS) on page 3-36.

4If the System Error continues, replace the Left Ink Supply Station. See Left Ink Supply Station on page 6-183.

5If the System Error continues, replace the Main PCA. See Electronics Module Main PCA and PSU (T1100/T1100ps/T610) on page 6-202 or Electronics Module Main PCA and PSU (T1120/T1120ps) on page 6-205.

System Error:

22.1:YZ

Problem

Left Ink Supply Station error.

Description:

 

Corrective Action: Try the following:

1Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer.

2Check that the cables between the Left Ink Supply Station and Main PCA the are not damaged and are correctly connected.

3Perform the Ink Delivery System diagnostic test to troubleshoot the problem further. See 7. Ink Delivery System (IDS) on page 3-36.

4If the System Error continues, replace the Left Ink Supply Station. See Left Ink Supply Station on page 6-183.

5If the System Error continues, replace the Main PCA. See Starwheel Assembly on page 6-208.

System Error:

24:YZ

Problem

Ink Setup failure (you must bring purgers).

Description:

 

Corrective Action: Try the following:

1Switch the Power OFF from the back of the Printer and disconnect the Power cord. Insert the new purgers, reconnect the power cord and power On the Printer.

2Perform the Ink Delivery System diagnostic test in order to check that the bongos (pushers) go up and down to pressurize ink in the tubes and the Out of Ink sensors work properly. See 7. Ink Delivery System (IDS) on page 3-36.

3Try purging the Ink Supply Tubes again once the Printer has been restarted.

4If the diagnostic test does not find any problem, install new cartridges in the printer and try purging the Ink Supply Tubes again. It could be that one of the cartridges is defective.

5If the problem persists, replace the Ink Supply Tubes. See Ink Supply Tubes (T1100/T1100ps/T610) on page 6-187 or Ink Supply Tubes (T1120/ T1120ps) on page 6-193.

2-14

HP Designjet T Series — Service Manual