Removal and Installation - Pen to Paper Space (PPS) Solenoid (T1120/T1120ps)

Pen to Paper Space (PPS) Solenoid (T1120/T1120ps)

Removal

Switch off the printer and remove the power cable.

1. Remove the Right Cover on page 6-27.

2. Unroute the Pen to Paper Space (PPS) Solenoid cable from the cable clamp.

3. Disconnect the Pen to Paper Space (PPS) Solenoid connector from the L1 Data Harness.

4. Remove two T-15 screws that secure the Pen to Paper Space (PPS) Solenoid to the printer.

HP Designjet T Series — Service Manual

6-77