OPERATION PANEL

HOME

PROOF COPY

SYSTEM

SETTINGS

JOB STATUS

LOGOUT

(1)

(2)

(3)

(4)

(5) (6)

(1)Status indicators

Green and red indicators will light or blink to indicate the machine's status. When the green indicator lights or blinks, the machine is operating normally. When the red indicator lights or blinks, an error has occurred.

☞STATUS INDICATORS (page 17)

(2)Touch panel

Messages and keys appear in the touch panel display. Touch the displayed keys to perform a variety of operations.

When a key is touched, a beep sounds and the selected item is highlighted. This provides confirmation as you perform an operation.

☞TOUCH PANEL (page 12)

(3)[HOME] key

Touch this key to display the home screen. Frequently used settings can be registered in the home screen to enable quick and easy operation of the machine.

☞HOME SCREEN (page 25)

(4)[SYSTEM SETTINGS] key

Press this key to display the system settings menu screen. The system settings are used to configure paper tray settings, store addresses for transmission operations, and adjust parameters to make the machine easier to use.

☞5. SYSTEM SETTINGS (page 71)

☞Administrator's Guide

(7)(8) (9) (10)

(5)[JOB STATUS] key

Press this key to display the job status screen. The job status screen is used to check information on jobs and to cancel jobs.

☞PRINT/SEND STATUS (JOB STATUS) (page 16)

(6)[LOGOUT] key ()

Press this key to log out after you have logged in and used the machine. When using the fax function, this key can also be pressed to send tone signals on a pulse dial line.

☞USER AUTHENTICATION (page 20)

(7)Numeric keys

These are used to enter the number of copies, fax numbers, and other numerical values.

(8)[#/P] key ()

When using the copy function, press this key to use a job program. When using the fax function, this key can be used when dialing.

(9)[CLEAR ALL] key ()

Press this key to return to the initial operation state. Use this key when you wish to cancel all settings that have been selected and start operation from the initial state.

(10)[CLEAR] key ( )

Press this key to return the number of copies to "0".

10